Scuba Diving Heaven

If you wear contact or eyeglasses, you will find yourself in need of a special scuba diving mask when you go diving. Luckily, there are many places you can obtain a prescription scuba diving mask for just his purpose. Since water automatically magnifies a very specific prescription will be needed to account for your natural vision and that the effect of being under water. Thus having a prescription scuba mask created precisely for your needs is essential.

* Elements of a Scuba Diving Mask

All scuba diving masks have these basic features in common. A scuba diving mask tends to be quite large and square shaped, and come up high on the face. A scuba diving mask should go across the forehead reaching as low as the nose and the rubber that surrounds the areas of the mask in order to help to fit tightly against the face thereby providing a seal that is watertight.

On the other hand, a prescription scuba diving mask works by either having the entire lens area as being a prescription lens, or having the Rx lens to be inserted separately between the mask and the eyes of the wearer. Moreover, the lens in the diving mask is usually made out of glass, acrylic, regular ophthalmic plastic or polycarbonate.

Not all contact lenses are ideal for use in scuba diving. Lenses made of RGPs and the old hard lenses may dig in to the eyes at certain depths due to the increased water pressure. In addition, soft lenses may gather waterborne organisms and thus be contaminated and result in causing disease. It may occur even in pools as well as fresh and saltwater bodies. Thus a prescription scuba diving mask is a necessity if you have any visual impairment.

* Maintaining Your Scuba Diving Mask

In addition to procuring the appropriate mask, you will need to properly care for your mask to prevent it from breaking down from salt-water exposure. Rinsing your scuba diving mask completely in fresh water is a must to keep it in proper condition. A damaged mask could break apart during a site dive, and that would make for difficult exploration.

One of the reasons that rinsing your scuba diving mask after each use is essential is that salt crystals can damage and rust the metal components, while straps and fabrics may decompose and break off completely. The abrasive power of salt can scratch your lens and make gauges in your face mask.

In addition to regular rinsing of your scuba diving mask, you should inspect the straps and purge valve for damage consistently. Stretch the straps to look for any cracks that might be forming. Check the purge valve for trapped bits of salt and sand. If you see any weaknesses you will want to address them immediately as the integrity of your corrective scuba diving mask is critical to your safety during a dive.

* Fog Free Dive Mask

Once you have your dive mask, keeping it fog free can be challenging. Though some people use saliva (which seems to help some, we found that Aquaseal Sea Drops Anti-Fog & Lens Cleaner really works well. It keeps it much clearer as is much more sanitary. As an added bonus it is used to clean your lenses as well.

Technorati Tags: prescription scuba diving, corrective scuba diving mask